Basic Latent Print Kit This is a basic print kit packed in an oversized box so that there is room in the kit for the investigator to add particular items of preference. Latent print backing cards, pens, scissors or a small magnifying glass can be carried in this kit. The latent print brush is stored in a protective tube and held by a clip inside the lid. The tape and Bi-Chromatic™ fingerprint powder are held in a fitted insert. This kit includes the standard Zephyr® Fiberglass Brush. 1 – Kit Box C contains: Bi-Chromatic Powder, 29g (2oz.); Zephyr Brush; Clear Lifting Tape, 3.8cm x 9.1m (1 1/2in x 360in); White Backing Cards, Pack of 100; Fitted Compartmentalized Insert •Large box container •Secure storage •Easy to carry

Basic Latent Print Kit w/Camelhair Brush This basic latent print kit is packed in an oversized box, so there is room to add additional supplies. The latent print brush is stored in a protective tube and held by a clip inside the lid. The tape and Bi-Chromatic™ fingerprint powder are held in a fitted insert. This kit has a camelhair brush. 1 – Kit Box C contains: Bi-Chromatic Powder, 29g (2oz.); Zephyr Brush; Clear Lifting Tape, 3.8cm x 9.1m (1 1/2" x 360"); White Backing Cards, Pack of 100; Fitted Compartmentalized Insert

Standard Latent Print Kit This kit features two colors of fingerprint powder: Black and Silver/Gray. The kit has plenty of room for additional supplies such as pens, pencils, or scissors. The Zephyr brushes are stored in protective tubes and held with clips inside the lid. The rolls of tape and fingerprint powders are held in a fitted insert. 1 – Kit Box C contains: Black Powder, 34g (2oz.); Silver/Gray Powder, 44g (2oz.); Two Zephyr Brushes; Clear Lifting Tape, 3.8cm x 9.1m (1 1/2in x 360in); Clear Lifting Tape, 5.1cm x 9.1m (2in x 360in); White Backing Cards, Pack of 100; Fitted Compartmentalized Insert •Black Powder, 34g (2oz.) •Two Zephyr Brushes •Clear Lifting Tape, 3.8cm x 9.1m (1 1/2" x 360") •Clear Lifting Tape, 5.1cm x 9.1m (2" x 360") •White Backing Cards, Pack of 100 •Fitted Compartmentalized Insert

1oz. Black Magnetic Fingerprint Powder Magnetic latent print powders are similar in appearance to standard powders, but they contain iron so that they will adhere to a magnet. When a magnetic powder applicator is dipped into the jar of magnetic powder, the powder gathers around the magnetic end of the applicator and it becomes a "brush." When dusting is complete, hold the applicator over the jar, and a short pull on the top end will lift the magnet, allowing the powder to drop back into the jar. For this reason, very little powder is wasted. The new wide-mouth jar of magnetic powder will accept the large ball of powder held on the tip of the magnetic applicator.