Bi-Chromatic Fingerprint Powder, 2oz, 16oz or 128oz Bi-Chromatic™ Powder has the remarkable properties of appearing black when dusted on a light-colored surface and silver when dusted on dark-colored surfaces. Using a Zephyr® Fiberglass Brush and Bi-Chromatic™ Powder, you can dust up to 90 percent of the surfaces found at most crime scenes. The greatest advantage of using Bi-Chromatic™ Powder is that the lifted prints will be black when placed on a white backing card. This eliminates the bother of comparing latent prints with light-colored ridges on a black background against rolled prints with black ridges on a white background. It also means that only white backing cards will be needed. •Powder appears black when dusted on a light-colored surface and silver when dusted on dark-colored surfaces •Lifted prints will be black when placed on a white backing card NOTE: More info on Long Description

White Fingerprint Powder, 2oz, 16oz & 128oz For maximum contrast against a dark-colored background, Lightning® White Powder is recommended. Use a dedicated Zephyr® Fiberglass Brush for white powder to avoid contamination from other colors of powder. •Provides maximum contrast against a dark-colored backgrounds •However, when you lift the developed print with tape or a Lightning Lift™, place it on a black backing card or use a Handi-Lift™ with a black backer.

Bi-Chromatic Zephyr Latent Print Kit This compact kit is designed to fit inside of another box or briefcase or in the glovebox of your patrol car. Kit Box A, 26.4cm x 11.7cm x 4.3cm (10 3/8" x 4 5/8" x 1 11/16") Bi-Chromatic Powder, 29g (2oz.) Zephyr Fiberglass Brush Lifting Tape, 3.8cm x 9.1m (1 1/2" x 360") White Backing Cards, 7.6cm x 12.7cm (3" x 5"), Pack of 100 •Includes Zephyr Fiberglass Brush 1 - Bi-Chromatic™ powder, 2 oz. (60 cc) volume. 1 - Zephyr® fiberglass brush. 1 - 1 1/2" lifting tape. 100 - white 3" x 5" latent print backing cards. 1 - polypropylene kit box, 10 3/8" x 4 5/8" x 1 11/16".

Basic Latent Print Kit w/Camelhair Brush This basic latent print kit is packed in an oversized box, so there is room to add additional supplies. The latent print brush is stored in a protective tube and held by a clip inside the lid. The tape and Bi-Chromatic™ fingerprint powder are held in a fitted insert. This kit has a camelhair brush. 1 – Kit Box C contains: Bi-Chromatic Powder, 29g (2oz.); Zephyr Brush; Clear Lifting Tape, 3.8cm x 9.1m (1 1/2" x 360"); White Backing Cards, Pack of 100; Fitted Compartmentalized Insert

Basic Magnetic Powder Kit This compact kit is designed to fit inside of another box or briefcase or in the glovebox of your patrol car. The jars of powder in this kit are the 90 cc wide-mouth jars for convenient use with the magnetic applicator. 1 - Black Magnetic Powder, 1 oz, (124G) (30 cc) volume 1 - Silver/Gray Magnetic Powder, 1 oz, (124G) (30 cc) volume 1 - magnetic powder applicator 1 - polypropylene kit box, 8 3/8" x 4 1/2" x 1 11/16"

Magnetic/Regular Latent Print Kit w/ Camelhair Brush This kit contains both regular and magnetic dusting powders in wide-mouth jars. Both powders are Bi-Chromatic™, so you can dust either light -or dark-colored surfaces with acceptable contrast. Regular and magnetic powders allow you to dust many different types of surfaces. There is also storage in this kit for additional supplies, such as scissors, pens, pencils or a magnifying glass. A Zephyr® Fiberglass Brush can be substituted for the standard camelhair brush. 1 -- Kit Box C, 12.125" x 7.25" x 4.5" (30.8cm x 18.4cm x 11.4cm) Contains: • Bi-Chromatic Powder, 2oz (56.70g) • Bi-Chromatic Magnetic Powder, 1oz. (28.35g) • Regular Camelhair or Zephyr® Brush • Magnetic Applicator • Clear Lifting Tape, 1.5” x 360" (3.8cm x 9.1m) • Clear Lifting Tape, 2” x 360" (5.1cm x 9.1m) • White Backing Cards, Pack of 100

Magnetic/Regular Latent Print Kit w/ Zephyr Brush This kit contains both regular and magnetic dusting powders in wide-mouth jars. Both powders are Bi-Chromatic™, so you can dust either light- or dark-colored surfaces with acceptable contrast. Regular and magnetic powders allow you to dust many different types of surfaces. There is also storage in this kit for additional supplies, such as scissors, pens, pencils or a magnifying glass. A camelhair brush can be substituted for the standard Zephyr® Fiberglass Brush. 1 -- Kit Box C, 12.125" x 7.25" x 4.5" (30.8cm x 18.4cm x 11.4cm) Contains: • Bi-Chromatic Powder, 2oz (56.70g) • Bi-Chromatic Magnetic Powder, 1oz (28.35g) • Regular Camelhair or Zephyr® Brush • Magnetic Applicator • Clear Lifting Tape, 1.5" x 360" (3.8cm x 9.1m) • Clear Lifting Tape, 2" x 360" (5.1cm x 9.1m) • White Backing Cards, Pack of 100

Model 100 Crime Scene Kit Use self-contained kit to dust for latent prints. Model 100 Crime Scene Kit 1 – Aluminum briefcase 36.8cm x 44.5cm x 12.7cm (141/2in x 171/2in x 5in) Contains: Black Fingerprint Powder, 34g (2oz.), Silver/Gray Fingerprint Powder, 24g (2oz.), Two Zephyr® Brushes Clear Lift Tape, 3.8cm x 9.1m (1 1/2in x 360in) Clear Lift Tape, 5.1cm x 9.1m (2in x 360in) Metal Tape Dispenser, For 3.8cm (1 1/2in) Tape Metal Tape Dispenser, For 5.1cm (2in) Tape White Backing Cards, Pack of 100 Black Backing Cards, Pack of 50 Perfect Print™ Elimination Kit 1 – Kit Box A, 21.3cm x 11.4cm x 4.3cm (83?8in x 41/2in x 111?16in) Contains: Yellow “Sealed Evidence” Labels Tweezers Scalpel Six-Inch White Evidence Ruler Scriber Evidence Labels, Pack of 100

Model 300 Crime Scene Kit This is the ultimate crime scene kit. Segmented into separate tasks, this kit will allow you to dust for latent prints on nearly any surface using the included standard and magnetic latent print powders, as well as develop latent prints using fluorescent powders on difficult surfaces and backgrounds. The included ultraviolet light source assists in fluorescent latent print development and searches for physical evidence. Elimination fingerprints can be recorded with the included Easy Print® pad and cardholder and evidence labels and tapes are included to assist in collecting and documenting evidence. Each kit is self-contained in a sturdy polypropylene kit box so they stay separated and clean, preventing contamination, as well as allowing you to easily distribute the workload at the crime scene. Ultraviolet light available in either a 110V or 220V.

Standard Magnetic Applicator This ergonomically designed tool features a spring-loaded handle holding the internal magnet forward, allowing for dusting above a horizontal plane, even overhead. When ready, simply pull the handle to release the powder. A hexagonal lip around the rim of the applicator prevents powder from creeping up the handle and prevents the applicator from rolling away when placed on an uneven surface. The Standard Magnetic Applicator has a powerful magnet to hold a large amount of magnetic powder and is 14cm (5½”) long. •Spring-loaded handle •A hexagonal lip around the rim of the applicator •Pull the handle to release the powder •Powerful magnet

TEX Ultra Light Magnetic Applicator Designed by JR Davis, retired from the Houston Police Department, TEX can be used at hazardous crime scenes and then the outside cover discarded. A new cover is put on and you can continue working. This will help prevent contamination from surface to surface, from your brush to your kit and from your brush to your jar of powder. Each TEX disposable magnetic brush comes with four additional replacement covers, so it is like having five clean, new brushes to work with. The name of this magnetic brush, TEX, comes from the shape. (It resembles a tall, skinny person wearing a cowboy hat.) Designed by J.R. Davis for use at hazardous crime scenes, the TEX Ultra-Light is a lightweight and powerful magnetic applicator. •Includes five disposable covers to protect the wand during use and eliminate the chance of cross-contaminating evidence •Use a separate cover at each crime scene, or use one for each color of powder •When finished dusting, simply pull the cover away from the magnet to release the ball of powder

1oz. Black Magnetic Fingerprint Powder Magnetic latent print powders are similar in appearance to standard powders, but they contain iron so that they will adhere to a magnet. When a magnetic powder applicator is dipped into the jar of magnetic powder, the powder gathers around the magnetic end of the applicator and it becomes a "brush." When dusting is complete, hold the applicator over the jar, and a short pull on the top end will lift the magnet, allowing the powder to drop back into the jar. For this reason, very little powder is wasted. The new wide-mouth jar of magnetic powder will accept the large ball of powder held on the tip of the magnetic applicator.

The Original Zephyr Fingerprint Brush The Zephyr® Brush is the finest brush ever developed for use in fingerprint work. •Has a long life •Capacity to pick up and retain large amounts of fingerprint powder •The filament ends actually become softer with each use. •Brush consists of thousands of fiber bundles, each composed of more than a hundred individual treated-glass filaments •Since 1956, the Zephyr® Brush continues to be the best fiberglass fingerprint dusting brush available

White Cotton Evidence Handling Gloves (1 Dozen) These lightweight, white cotton gloves are ideal for eliminating the problem of leaving your own latent prints on evidence when dusting these items with powder. These will also be very useful around the photo lab to keep your prints off of the negatives and for document examiners during humid weather to keep any perspiration off the document. Because of the low price, once these gloves become dirty, these gloves are considered disposable. One size fits all, ambidextrous.