Basic Magnetic Powder Kit This compact kit is designed to fit inside of another box or briefcase or in the glovebox of your patrol car. The jars of powder in this kit are the 90 cc wide-mouth jars for convenient use with the magnetic applicator. 1 - Black Magnetic Powder, 1 oz, (124G) (30 cc) volume 1 - Silver/Gray Magnetic Powder, 1 oz, (124G) (30 cc) volume 1 - magnetic powder applicator 1 - polypropylene kit box, 8 3/8" x 4 1/2" x 1 11/16"

Magnetic/Regular Latent Print Kit w/ Camelhair Brush This kit contains both regular and magnetic dusting powders in wide-mouth jars. Both powders are Bi-Chromatic™, so you can dust either light -or dark-colored surfaces with acceptable contrast. Regular and magnetic powders allow you to dust many different types of surfaces. There is also storage in this kit for additional supplies, such as scissors, pens, pencils or a magnifying glass. A Zephyr® Fiberglass Brush can be substituted for the standard camelhair brush. 1 -- Kit Box C, 12.125" x 7.25" x 4.5" (30.8cm x 18.4cm x 11.4cm) Contains: • Bi-Chromatic Powder, 2oz (56.70g) • Bi-Chromatic Magnetic Powder, 1oz. (28.35g) • Regular Camelhair or Zephyr® Brush • Magnetic Applicator • Clear Lifting Tape, 1.5” x 360" (3.8cm x 9.1m) • Clear Lifting Tape, 2” x 360" (5.1cm x 9.1m) • White Backing Cards, Pack of 100

Magnetic/Regular Latent Print Kit w/ Zephyr Brush This kit contains both regular and magnetic dusting powders in wide-mouth jars. Both powders are Bi-Chromatic™, so you can dust either light- or dark-colored surfaces with acceptable contrast. Regular and magnetic powders allow you to dust many different types of surfaces. There is also storage in this kit for additional supplies, such as scissors, pens, pencils or a magnifying glass. A camelhair brush can be substituted for the standard Zephyr® Fiberglass Brush. 1 -- Kit Box C, 12.125" x 7.25" x 4.5" (30.8cm x 18.4cm x 11.4cm) Contains: • Bi-Chromatic Powder, 2oz (56.70g) • Bi-Chromatic Magnetic Powder, 1oz (28.35g) • Regular Camelhair or Zephyr® Brush • Magnetic Applicator • Clear Lifting Tape, 1.5" x 360" (3.8cm x 9.1m) • Clear Lifting Tape, 2" x 360" (5.1cm x 9.1m) • White Backing Cards, Pack of 100

TEX Ultra Light Magnetic Applicator Designed by JR Davis, retired from the Houston Police Department, TEX can be used at hazardous crime scenes and then the outside cover discarded. A new cover is put on and you can continue working. This will help prevent contamination from surface to surface, from your brush to your kit and from your brush to your jar of powder. Each TEX disposable magnetic brush comes with four additional replacement covers, so it is like having five clean, new brushes to work with. The name of this magnetic brush, TEX, comes from the shape. (It resembles a tall, skinny person wearing a cowboy hat.) Designed by J.R. Davis for use at hazardous crime scenes, the TEX Ultra-Light is a lightweight and powerful magnetic applicator. •Includes five disposable covers to protect the wand during use and eliminate the chance of cross-contaminating evidence •Use a separate cover at each crime scene, or use one for each color of powder •When finished dusting, simply pull the cover away from the magnet to release the ball of powder

1oz. Black Magnetic Fingerprint Powder Magnetic latent print powders are similar in appearance to standard powders, but they contain iron so that they will adhere to a magnet. When a magnetic powder applicator is dipped into the jar of magnetic powder, the powder gathers around the magnetic end of the applicator and it becomes a "brush." When dusting is complete, hold the applicator over the jar, and a short pull on the top end will lift the magnet, allowing the powder to drop back into the jar. For this reason, very little powder is wasted. The new wide-mouth jar of magnetic powder will accept the large ball of powder held on the tip of the magnetic applicator.

2x2 Lightning Lift Pads (25 Sheets) 1 pad of 25 sheets each Lightning Lifts Pads are clear pads of pre-cut latent print lifters. Just like lift tape, simply peel a fresh lifter from the pad when needed. Placing the lift so the tab is “up” in relation to the print will simplify documentation and viewing. •A paper tab at the end of each lift keeps fingerprints off the adhesive •The tab indicates when the print is viewed from the correct side •Each pack includes 25 individual lifts

3"x5" Numbered White Latent Cards (Pack of 1000) Latent prints lifted with clear or frosted tape are mounted on the glossy side of the latent card. The non-glossy side is for case information and a rough sketch of the recovery location of the latent print. The card may be used to accommodate a row of three or four latent prints, thereby maintaining each print in relation to its neighbor-a great help when trying to determine which hand, or the position of the hand, on the object. It can also accommodate a wider width of lifting tape. The latent prints can be viewed or exhibited separately from the case data (on reverse side of card), which avoids influencing the viewer. The card has sufficient space for writing the needed information, such as the case number, date, crime type, victim, address, location of the latent print recovery, the person lifting the latent and their badge or identification number. It also has sufficient room for a sketch or other remarks. The white cards are preprinted with a gray ink, which prevents any of the lines or data from showing through to the other side of the card to interfere with the photography of the latent prints. The Numbered backing cards can help prevent the inclusion of fabricated latent prints by providing additional documentation.