Manufacturer: LIGHTNING POWDER
Bi-Chromatic Fingerprint Powder, 2oz, 16oz or 128oz
Bi-Chromatic Fingerprint Powder, 2oz, 16oz or 128oz Bi-Chromatic™ Powder has the remarkable properties of appearing black when dusted on a light-colored surface and silver when dusted on dark-colored surfaces. Using a Zephyr® Fiberglass Brush and Bi-Chromatic™ Powder, you can dust up to 90 percent of the surfaces found at most crime scenes. The greatest advantage of using Bi-Chromatic™ Powder is that the lifted prints will be black when placed on a white backing card. This eliminates the bother of comparing latent prints with light-colored ridges on a black background against rolled prints with black ridges on a white background. It also means that only white backing cards will be needed. •Powder appears black when dusted on a light-colored surface and silver when dusted on dark-colored surfaces •Lifted prints will be black when placed on a white backing card NOTE: More info on Long Description
JAR SIZES:
2 oz16 oz (+$26.33)128 oz (+$117.26)
Price: $8.54
Manufacturer: LIGHTNING POWDER
Basic Yellow 40, 25 Grams
Basic Yellow 40, 25 Grams Basic Yellow 40 (Maxilon Flavine 10GFF) is a highly fluorescent dye stain which stains cyanoacrylate-developed latent prints. When illuminated with an ultraviolet lamp or Forensic Light Source, latent prints fluoresce brightly, and weakly-developed latent prints that could not be seen under normal viewing conditions may be easily seen and photographed. Basic Yellow 40 is very sensitive to ultraviolet light and can be used with a simple long-wavelength ultraviolet lamp. It is often used by police agencies that cannot afford to purchase a more expensive Forensic Light Source. It can be used after cyanoacrylate fuming on surfaces such as cans, leather and plastics and fluoresces well between 365nm and 485nm. NOTE: More Info in LONG DESCRIPTION Shelf life of dry powder: indefinite as long as it is dry. Store in a cool, dark place. Shelf life of mixed solution: approximately 6 months. Store the mixed solution in a dark bottle in a fume hood or flammable liquids cabinet.
Price: $11.47
Manufacturer: LIGHTNING POWDER
Ardrox Fluorescent Dye, 1 Quart
1 Quart Ardrox Fluorescent Dye Ardrox is a fluorescent liquid dye which works well with lasers, Forensic Light Sources and UV lamps. Ardrox can be used full-strength or can be diluted with ethanol or methanol. Since the solution is about the consistency of syrup, most examiners prefer to dilute it. Ardrox dyes glue-fumed, developed latent prints quite well. While Ardrox-developed prints fluoresce under 365 nm, better results have been reported while examining evidence with 450-480 nm light. Shelf life of unmixed solution: five years. Keep in a cool, dry place. Shelf life of mixed solution: one year or longer. Store in a fume hood or flammable liquids cabinet.
Price: $37.16
Manufacturer: LIGHTNING POWDER
White Fingerprint Powder, 2oz, 16oz or  128oz
White Fingerprint Powder, 2oz, 16oz & 128oz For maximum contrast against a dark-colored background, Lightning® White Powder is recommended. Use a dedicated Zephyr® Fiberglass Brush for white powder to avoid contamination from other colors of powder. •Provides maximum contrast against a dark-colored backgrounds •However, when you lift the developed print with tape or a Lightning Lift™, place it on a black backing card or use a Handi-Lift™ with a black backer.
JAR SIZES:
2 oz16 oz (+$27.02)128 oz (+$213.34)
Price: $8.88
Manufacturer: LIGHTNING POWDER
Bi-Chromatic Zephyr Latent Print Kit
Bi-Chromatic Zephyr Latent Print Kit This compact kit is designed to fit inside of another box or briefcase or in the glovebox of your patrol car. Kit Box A, 26.4cm x 11.7cm x 4.3cm (10 3/8" x 4 5/8" x 1 11/16") Bi-Chromatic Powder, 29g (2oz.) Zephyr Fiberglass Brush Lifting Tape, 3.8cm x 9.1m (1 1/2" x 360") White Backing Cards, 7.6cm x 12.7cm (3" x 5"), Pack of 100 •Includes Zephyr Fiberglass Brush 1 - Bi-Chromatic™ powder, 2 oz. (60 cc) volume. 1 - Zephyr® fiberglass brush. 1 - 1 1/2" lifting tape. 100 - white 3" x 5" latent print backing cards. 1 - polypropylene kit box, 10 3/8" x 4 5/8" x 1 11/16".
Price: $34.89
Manufacturer: LIGHTNING POWDER
Basic Latent Print Kit w/Camelhair Brush
Basic Latent Print Kit w/Camelhair Brush This basic latent print kit is packed in an oversized box, so there is room to add additional supplies. The latent print brush is stored in a protective tube and held by a clip inside the lid. The tape and Bi-Chromatic™ fingerprint powder are held in a fitted insert. This kit has a camelhair brush. 1 – Kit Box C contains: Bi-Chromatic Powder, 29g (2oz.); Zephyr Brush; Clear Lifting Tape, 3.8cm x 9.1m (1 1/2" x 360"); White Backing Cards, Pack of 100; Fitted Compartmentalized Insert
Price: $45.97
Manufacturer: LIGHTNING POWDER
Basic Magnetic Powder Kit
Basic Magnetic Powder Kit This compact kit is designed to fit inside of another box or briefcase or in the glovebox of your patrol car. The jars of powder in this kit are the 90 cc wide-mouth jars for convenient use with the magnetic applicator. 1 - Black Magnetic Powder, 1 oz, (124G) (30 cc) volume 1 - Silver/Gray Magnetic Powder, 1 oz, (124G) (30 cc) volume 1 - magnetic powder applicator 1 - polypropylene kit box, 8 3/8" x 4 1/2" x 1 11/16"
Price: $35.65
Manufacturer: LIGHTNING POWDER
Magnetic/Regular Latent Print Kit w/ Camelhair Brush
Magnetic/Regular Latent Print Kit w/ Camelhair Brush This kit contains both regular and magnetic dusting powders in wide-mouth jars. Both powders are Bi-Chromatic™, so you can dust either light -or dark-colored surfaces with acceptable contrast. Regular and magnetic powders allow you to dust many different types of surfaces. There is also storage in this kit for additional supplies, such as scissors, pens, pencils or a magnifying glass. A Zephyr® Fiberglass Brush can be substituted for the standard camelhair brush. 1 -- Kit Box C, 12.125" x 7.25" x 4.5" (30.8cm x 18.4cm x 11.4cm) Contains: • Bi-Chromatic Powder, 2oz (56.70g) • Bi-Chromatic Magnetic Powder, 1oz. (28.35g) • Regular Camelhair or Zephyr® Brush • Magnetic Applicator • Clear Lifting Tape, 1.5” x 360" (3.8cm x 9.1m) • Clear Lifting Tape, 2” x 360" (5.1cm x 9.1m) • White Backing Cards, Pack of 100
Price: $72.94
Manufacturer: LIGHTNING POWDER
Magnetic/Regular Latent Print Kit w/ Zephyr Brush
Magnetic/Regular Latent Print Kit w/ Zephyr Brush This kit contains both regular and magnetic dusting powders in wide-mouth jars. Both powders are Bi-Chromatic™, so you can dust either light- or dark-colored surfaces with acceptable contrast. Regular and magnetic powders allow you to dust many different types of surfaces. There is also storage in this kit for additional supplies, such as scissors, pens, pencils or a magnifying glass. A camelhair brush can be substituted for the standard Zephyr® Fiberglass Brush. 1 -- Kit Box C, 12.125" x 7.25" x 4.5" (30.8cm x 18.4cm x 11.4cm) Contains: • Bi-Chromatic Powder, 2oz (56.70g) • Bi-Chromatic Magnetic Powder, 1oz (28.35g) • Regular Camelhair or Zephyr® Brush • Magnetic Applicator • Clear Lifting Tape, 1.5" x 360" (3.8cm x 9.1m) • Clear Lifting Tape, 2" x 360" (5.1cm x 9.1m) • White Backing Cards, Pack of 100
Price: $68.68
Manufacturer: LIGHTNING POWDER
Model 300 Crime Scene Kit
Model 300 Crime Scene Kit This is the ultimate crime scene kit. Segmented into separate tasks, this kit will allow you to dust for latent prints on nearly any surface using the included standard and magnetic latent print powders, as well as develop latent prints using fluorescent powders on difficult surfaces and backgrounds. The included ultraviolet light source assists in fluorescent latent print development and searches for physical evidence. Elimination fingerprints can be recorded with the included Easy Print® pad and cardholder and evidence labels and tapes are included to assist in collecting and documenting evidence. Each kit is self-contained in a sturdy polypropylene kit box so they stay separated and clean, preventing contamination, as well as allowing you to easily distribute the workload at the crime scene. Ultraviolet light available in either a 110V or 220V.
:
Price: $729.97
Manufacturer: LIGHTNING POWDER
Standard Magnetic Applicator
Standard Magnetic Applicator This ergonomically designed tool features a spring-loaded handle holding the internal magnet forward, allowing for dusting above a horizontal plane, even overhead. When ready, simply pull the handle to release the powder. A hexagonal lip around the rim of the applicator prevents powder from creeping up the handle and prevents the applicator from rolling away when placed on an uneven surface. The Standard Magnetic Applicator has a powerful magnet to hold a large amount of magnetic powder and is 14cm (5½”) long. •Spring-loaded handle •A hexagonal lip around the rim of the applicator •Pull the handle to release the powder •Powerful magnet
Price: $26.83
Manufacturer: LIGHTNING POWDER
Black Magnetic Fingerprint Powder, 1 oz
1oz. Black Magnetic Fingerprint Powder Magnetic latent print powders are similar in appearance to standard powders, but they contain iron so that they will adhere to a magnet. When a magnetic powder applicator is dipped into the jar of magnetic powder, the powder gathers around the magnetic end of the applicator and it becomes a "brush." When dusting is complete, hold the applicator over the jar, and a short pull on the top end will lift the magnet, allowing the powder to drop back into the jar. For this reason, very little powder is wasted. The new wide-mouth jar of magnetic powder will accept the large ball of powder held on the tip of the magnetic applicator.
Price: $7.79
Manufacturer: LIGHTNING POWDER
The Original Zephyr Fingerprint Brush
The Original Zephyr Fingerprint Brush The Zephyr® Brush is the finest brush ever developed for use in fingerprint work. •Has a long life •Capacity to pick up and retain large amounts of fingerprint powder •The filament ends actually become softer with each use. •Brush consists of thousands of fiber bundles, each composed of more than a hundred individual treated-glass filaments •Since 1956, the Zephyr® Brush continues to be the best fiberglass fingerprint dusting brush available
Price: $11.65
Manufacturer: LIGHTNING POWDER
2x2 Lightning Lift Pads (25 Sheets)
2x2 Lightning Lift Pads (25 Sheets) 1 pad of 25 sheets each Lightning Lifts Pads are clear pads of pre-cut latent print lifters. Just like lift tape, simply peel a fresh lifter from the pad when needed. Placing the lift so the tab is “up” in relation to the print will simplify documentation and viewing. •A paper tab at the end of each lift keeps fingerprints off the adhesive •The tab indicates when the print is viewed from the correct side •Each pack includes 25 individual lifts
Price: $4.29
Manufacturer: LIGHTNING POWDER
3"x5" Numbered White Latent Cards (Pack of 1000)
3"x5" Numbered White Latent Cards (Pack of 1000) Latent prints lifted with clear or frosted tape are mounted on the glossy side of the latent card. The non-glossy side is for case information and a rough sketch of the recovery location of the latent print. The card may be used to accommodate a row of three or four latent prints, thereby maintaining each print in relation to its neighbor-a great help when trying to determine which hand, or the position of the hand, on the object. It can also accommodate a wider width of lifting tape. The latent prints can be viewed or exhibited separately from the case data (on reverse side of card), which avoids influencing the viewer. The card has sufficient space for writing the needed information, such as the case number, date, crime type, victim, address, location of the latent print recovery, the person lifting the latent and their badge or identification number. It also has sufficient room for a sketch or other remarks. The white cards are preprinted with a gray ink, which prevents any of the lines or data from showing through to the other side of the card to interfere with the photography of the latent prints. The Numbered backing cards can help prevent the inclusion of fabricated latent prints by providing additional documentation.
List Price: $204.52
Price: $198.68
Manufacturer: LIGHTNING POWDER
Ninhydrin Pump Spray, Methanol-Based, 8 oz
Ninhydrin Pump Spray, Methanol-Based, 8 oz Ninhydrin is one the best processes available to develop latent prints on paper evidence, such as bad checks, hold-up notes and threatening letters. To avoid the use of aerosol sprays which may not saturate the paper as well, here is an alternative. This formulation of Ninhydrin will not run most inks. With this bottle, you have the option of unscrewing the lid, pouring the solution into a tray and dipping paper evidence for maximum saturation and superior development of latent prints. This solution is hazardous and must be sprayed in a fume hood and stored inside a flammable liquids cabinet. This pre-mixed Ninhydrin solution comes in a convenient pump spray bottle. The methanol-based mixture requires an additional surcharge to ship by air. •Formulations will not run most inks •Comes in a convenient pump •Solution has a shelf life of six months
Price: $37.45
Manufacturer: LIGHTNING POWDER
SPR Spray (500ml Pump Bottle), BLACK or WHITE
SPR Spray (500ml Pump Bottles) WHITE or BLACK Pre-mixed in non-aerosol bottles with pump sprayers, this SPR solution is ready for use out of the box. Available in black or white. Use Black SPR on light-colored surfaces and White SPR on dark-colored surfaces. •Has a fluorescent component that allows fingerprints to be detected using an ultraviolet or forensic light source. •Pre-mixed SPR Spray has a shelf-life of six months from purchase •Should be stored in a dark, cool place •Two colors of SPR are available, black or white
WHITE or BLACK:
WHITEBLACK (+$5.29)
Price: $40.67
Lightning Powder Drierite Crystals (2 oz.)
Lightning Powder Drierite Crystals (2 oz.) Iodine fuming is a method of developing latent prints on paper, cardboard, and many other paper surfaces. Iodine fuming should be used before Ninhydrin or Physical Developer (or other silver nitrate-type solution). Because it reacts to a different residue, it will not interfere with their subsequent application. This kit comes complete with carrying case, Iodine fuming apparatus, Drierite® crystals, glass wool, and Iodine crystals. Replacement items are available. Shelf-life of Iodine crystals: by keeping the jar tightly sealed, the Iodine will last for months. Once the jar is opened, the material will begin to sublimate (change from a solid into a gas without going through a liquid stage) immediately, so work quickly. This product is very corrosive and will rust many types of metals. Do not store it in a drawer with metal handles or fixtures.
Price: $9.35
« Previous | 1 | 2 | 3 | »