Rhodamine 6G, 25 Gram Rhodamine 6G is one of the best laser or forensic light source dyes available on the market. •It is inexpensive, safe to use and a little goes a long way •It can be diluted in methanol or other similar solvent, or in water •Can be used on metal, glass, leather, plastic and other surfaces •Unmixed Rhodamine 6G has an indefinite shelf life as long as it is kept dry and stored in a dark bottle •Mixed solution has a shelf-life of roughly one year and should be stored in a fume hood or flammable liquids cabinet NOTE: More Info in Long Description

Basic Latent Print Kit This is a basic print kit packed in an oversized box so that there is room in the kit for the investigator to add particular items of preference. Latent print backing cards, pens, scissors or a small magnifying glass can be carried in this kit. The latent print brush is stored in a protective tube and held by a clip inside the lid. The tape and Bi-Chromatic™ fingerprint powder are held in a fitted insert. This kit includes the standard Zephyr® Fiberglass Brush. 1 – Kit Box C contains: Bi-Chromatic Powder, 29g (2oz.); Zephyr Brush; Clear Lifting Tape, 3.8cm x 9.1m (1 1/2in x 360in); White Backing Cards, Pack of 100; Fitted Compartmentalized Insert •Large box container •Secure storage •Easy to carry

Standard Magnetic Applicator This ergonomically designed tool features a spring-loaded handle holding the internal magnet forward, allowing for dusting above a horizontal plane, even overhead. When ready, simply pull the handle to release the powder. A hexagonal lip around the rim of the applicator prevents powder from creeping up the handle and prevents the applicator from rolling away when placed on an uneven surface. The Standard Magnetic Applicator has a powerful magnet to hold a large amount of magnetic powder and is 14cm (5½”) long. •Spring-loaded handle •A hexagonal lip around the rim of the applicator •Pull the handle to release the powder •Powerful magnet

1oz. Black Magnetic Fingerprint Powder Magnetic latent print powders are similar in appearance to standard powders, but they contain iron so that they will adhere to a magnet. When a magnetic powder applicator is dipped into the jar of magnetic powder, the powder gathers around the magnetic end of the applicator and it becomes a "brush." When dusting is complete, hold the applicator over the jar, and a short pull on the top end will lift the magnet, allowing the powder to drop back into the jar. For this reason, very little powder is wasted. The new wide-mouth jar of magnetic powder will accept the large ball of powder held on the tip of the magnetic applicator.

Crystal Violet, 25 Grams Use Crystal Violet to develop latent fingerprints on the adhesive side of almost any kind of tape, e.g., Scotch, electrical, Kraft, etc. Mix the powder in water, soak the tape in the solution and rinse with running tap water. The caution about working with Crystal Violet powder or solution is that it is a very messy dye and will stain skin, clothes, floors and counter tops. It may be very difficult, if not impossible, to remove the stains from some clothing, furniture and floor covering. Crystal Violet is also often used as a "theft detection powder." The item is first VERY lightly dusted with the powder and when the item comes into contact with moisture (for example, the thief's hands), it turns dark purple and stains anything that comes into contact with it. However, this use is NOT suggested due to the messy nature of the product and the fact that the stains DO NOT come out of most surfaces. NOTE: More Info in the Long Description Shelf-life of Crystal Violet powder: indefinite. The working solution should not be kept much longer than 3-6 months. While older solutions may continue to work, the results might not be as good.

Aluminum Weighing Dishes, Pack of 100 Accelerate the cyanoacrylate fuming process by placing a hot plate and aluminum dish inside the fuming chamber. Place five to ten drops of liquid glue into the 5.1cm (2") diameter x 3.8cm (1.5") deep aluminum fuming dish and place it on the hot plate. Include a cup of warm water in the fuming chamber to add humidity and activate the hot plate. Time or watch the fuming process, as it is easy to over fume when heat is applied. •Large 7.6cm (3") diameter heating surface •Hot plate measures 11.4cm x 11.4cm x 1.3cm (41/2" x 41/2" x 1/2") •Fits easily into a kit box for use in the field.

Photo Evidence Markers, Letters A-Z Ideal for marking evidence outdoors or for large scene photography. Made of a durable matte yellow plastic and black printed lettering, the stackable A-frame design allows for compact storage. Ridges along the edges ensure the markers won't get scratched or stick together when stacked. Small letters in the corner are beneficial for close-up photography. Use in combination with numbers or in a corner of the scene to indicate photographic sequence. • High quality yellow plastic with black markings • Stack for easy storage and transportation • Plastic is easy to clean and decontaminate • Markers will not stick together when wet